Introduction to Basic Rigging
Rigging questions test load control, center of gravity, sling inspection, hitch choice, hardware, hand signals, tag lines, exclusion zones, and stop-work decisions.
How to study NCCER Core
Build each answer around jobsite fundamentals: control the hazard, choose the right tool, do the math carefully, read the drawing before acting, communicate clearly, lift and rig within limits, and show employability habits that keep crews productive and safe.
Core concepts
Concept 1
Introduction to Basic Rigging questions reward the answer that follows the official rule source, safety duty, and practical work sequence.
Exam cue: Identify the system, hazard, tool, code rule, or licensing duty being tested.
Concept 2
The strongest answer controls the hazard before continuing work, testing equipment, or documenting completion.
Exam cue: Check inspection, isolation, measurement, documentation, and environmental requirements.
Concept 3
Eliminate answers that ignore inspection, code clearance, environmental controls, lockout, labeling, or qualification limits.
Exam cue: Choose the safe compliant answer before the fastest production answer.
Risk pitfalls and guardrails
Treating local, state, and federal rules as interchangeable.
Guardrail: Avoid answers that skip inspection, ignore the code source, energize unsafe equipment, vent regulated material, or treat local rules as optional.
Skipping required inspection, isolation, documentation, or recovery steps.
Guardrail: Avoid answers that skip inspection, ignore the code source, energize unsafe equipment, vent regulated material, or treat local rules as optional.
Choosing a convenient answer that exceeds the worker's qualification or equipment rating.
Guardrail: Avoid answers that skip inspection, ignore the code source, energize unsafe equipment, vent regulated material, or treat local rules as optional.
Memory anchors
Qualified Direction
Rigging work should be directed by trained and authorized personnel for the lift.
Inspect Rigging
Slings, hooks, shackles, and hardware must be inspected before use.
Working Load Limit
Never exceed the working load limit of rigging equipment.
Center Gravity
The hook should align over the load's center of gravity to prevent tipping or swinging.
Sling Angle
Lower sling angles increase tension and can overload the sling.
Hitch Type
Vertical, choker, and basket hitches have different capacity and control characteristics.
Tag Line
A tag line helps control rotation while keeping workers away from the load.
Suspended Load
Never stand or travel under a suspended load.
Hand Signal
Use standard hand signals or a designated signal person to avoid conflicting commands.
Emergency Stop
Anyone who sees an imminent hazard should signal stop and alert the crew.
Checkpoint rule
Do the check-up only after you can summarize each concept in one sentence and identify one dangerous pitfall from memory.
Knowledge Check (after reading)
Short check-up to confirm understanding of this module.
Check-up Questions
What is the first step before using a sling for a lift?
A synthetic web sling has a cut across its edge. What should the rigger do?
Answer all questions to submit.
Next step personalized recommendations
Continue learning
Move forward only after this module is stable.
What is Pass Harbor?
Completely free exam prep for 317 U.S. exams.
- Practice questions
- Flashcards
- Study guides
- Mock exams
- No registration
- No paywall
- Start instantly
“No more expensive exam prep. Quality study tools should be accessible to everyone.”