Airframe Inspection
Airframe inspection questions test inspection programs, AD compliance, 100-hour and annual concepts, records, discrepancy handling, and inspection methods.
How to study FAA Airframe
Build each answer around approved maintenance data: identify the structure or system, control stored energy and contamination, inspect before replacing, document discrepancies, and never return an aircraft to service on an assumption.
Core concepts
Concept 1
Airframe Inspection questions reward the answer that follows the official rule source, safety duty, and practical work sequence.
Exam cue: Identify the system, hazard, tool, code rule, or licensing duty being tested.
Concept 2
The strongest answer controls the hazard before continuing work, testing equipment, or documenting completion.
Exam cue: Check inspection, isolation, measurement, documentation, and environmental requirements.
Concept 3
Eliminate answers that ignore inspection, code clearance, environmental controls, lockout, labeling, or qualification limits.
Exam cue: Choose the safe compliant answer before the fastest production answer.
Risk pitfalls and guardrails
Treating local, state, and federal rules as interchangeable.
Guardrail: Avoid answers that skip inspection, ignore the code source, energize unsafe equipment, vent regulated material, or treat local rules as optional.
Skipping required inspection, isolation, documentation, or recovery steps.
Guardrail: Avoid answers that skip inspection, ignore the code source, energize unsafe equipment, vent regulated material, or treat local rules as optional.
Choosing a convenient answer that exceeds the worker's qualification or equipment rating.
Guardrail: Avoid answers that skip inspection, ignore the code source, energize unsafe equipment, vent regulated material, or treat local rules as optional.
Memory anchors
Inspection Program
Inspection requirements depend on aircraft operation, maintenance program, and applicable regulations.
AD Compliance
Airworthiness directives must be checked for applicability, method, interval, and recurring action.
Annual Inspection
An annual inspection determines airworthiness and must be recorded by an authorized person.
Hundred Hour
A 100-hour inspection applies to certain commercial or instructional operations and has limited overrun rules.
Progressive Inspection
A progressive program divides inspection tasks while preserving full inspection coverage over the cycle.
Discrepancy Record
Unairworthy discrepancies must be recorded and resolved or deferred by an approved process.
Visual Method
Visual inspection requires access, lighting, cleaning, mirrors, magnification, and careful defect recognition.
NDT Selection
Nondestructive testing method must fit the material, defect type, location, and approved procedure.
Logbook Entry
Maintenance records need description, date, signature, certificate number, and approval status as required.
Return To Service
Return to service requires the work to be performed, inspected, and documented under proper authority.
Checkpoint rule
Do the check-up only after you can summarize each concept in one sentence and identify one dangerous pitfall from memory.
Knowledge Check (after reading)
Short check-up to confirm understanding of this module.
Check-up Questions
Who may approve an aircraft for return after an annual inspection?
Who may perform a 100-hour inspection on the airframe?
Answer all questions to submit.
Next step personalized recommendations
Continue learning
Move forward only after this module is stable.
What is Pass Harbor?
Completely free exam prep for 317 U.S. exams.
- Practice questions
- Flashcards
- Study guides
- Mock exams
- No registration
- No paywall
- Start instantly
“No more expensive exam prep. Quality study tools should be accessible to everyone.”