Lift Planning, Accessories and Signals
Follow the competent lift plan, inspect and select lifting accessories, establish exclusion and use one agreed signalling system.
How to prepare for an NPORS category assessment
Build a safe explanation from machine identity and information through checks, work-area controls, operation, stop conditions and shutdown; then practise it using the selected category's current learning outcomes.
Core concepts
Concept 1
Follow the competent lift plan, inspect and select lifting accessories, establish exclusion and use one agreed signalling system.
Exam cue: Confirm the exact NPORS category, machine, attachment and duty before applying a rule.
Concept 2
Confirm roles, load, centre of gravity, configuration, accessory capacity, route, landing area and contingency before lifting.
Exam cue: Confirm roles, load, centre of gravity, configuration, accessory capacity, route, landing area and contingency before lifting.
Concept 3
HSE states every lifting operation must be properly planned, appropriately supervised and carried out safely.
Exam cue: Name the stop condition and the authorised person or source needed to proceed.
Concept 4
The operator does not rewrite a competent lift plan or improvise an accessory because the load appears manageable.
Risk pitfalls and guardrails
Passing a suspended load over people or continuing after communication, weather or load behaviour changes.
Guardrail: Do not replace manufacturer information, physical protection, a competent plan or site authorisation with experience or memorised wording.
Treating a scheme card as universal permission to operate.
Guardrail: Do not replace manufacturer information, physical protection, a competent plan or site authorisation with experience or memorised wording.
Replacing current manufacturer or site controls with memory from another category.
Guardrail: A similar machine or held card does not remove category, attachment or familiarisation requirements.
Memory anchors
Plan, Supervise, Execute
LOLER connects the whole lifting operation.
Accessory Must Match
Identity, condition, angle and capacity all matter.
Lost Signal, Stop
Do not infer an instruction.
Lift Planning, Accessories and Signals: Source
Confirm the current NPORS category outcomes, equipment instructions and workplace controls.
Lift Planning, Accessories and Signals: Safe Boundary
Stop and escalate when the task, condition or decision exceeds the operator's competence or authority.
Checkpoint rule
Do the check-up only after you can summarize each concept in one sentence and identify one dangerous pitfall from memory.
Knowledge Check (after reading)
Short check-up to confirm understanding of this module.
Check-up Questions
A mobile-crane lift is being prepared. Who should produce the lifting plan?
For a non-routine mobile-crane lift, what should the plan identify?
Answer all questions to submit.
Next step personalized recommendations
Continue learning
Move forward only after this module is stable.
What is Pass Harbor?
Completely free exam prep for 247 UK exams.
- Practice questions
- Flashcards
- Study guides
- Mock exams
- No registration
- No paywall
- Start instantly
“No more expensive exam prep. Quality study tools should be accessible to everyone.”