Topic module

Electrical Safety

Supply selection, cables and connectors, inspection, isolation, wet conditions, overhead lines and electrical emergency response.

Long-form learning
Concept to Risk to Memory to Check-up

How to prepare for a CITB Specialist test

Lock in common site safety first, confirm the exact route with the card scheme, then add the relevant specialist hazards and competence boundaries.

Core concepts

Concept 1

Electrical systems and equipment must be suitable, protected, inspected and used within the site's distribution and isolation arrangements.

Exam cue: Inspect equipment, plugs, cables and connectors before use without dismantling them.

Concept 2

Damage, overheating, exposed conductors, water ingress or improvised connections require isolation and competent repair.

Exam cue: Use the assigned voltage, protection and connection rather than a makeshift adaptor.

Concept 3

A person or plant can be harmed without directly touching an overhead line because electricity may arc across a gap.

Exam cue: Keep clear after contact with an overhead line and follow the emergency plan.

Risk pitfalls and guardrails

Repairing a cable with ordinary tape and returning it to use.

Guardrail: Do not mix specialist routes or replace an engineered, competent control with a briefing, warning sign or PPE alone.

Assuming low voltage means no injury, fire or equipment risk.

Guardrail: Do not mix specialist routes or replace an engineered, competent control with a briefing, warning sign or PPE alone.

Approaching a machine in contact with a line before the supply is confirmed isolated.

Guardrail: Do not mix specialist routes or replace an engineered, competent control with a briefing, warning sign or PPE alone.

Memory anchors

Check, Connect, Protect

Inspect first, use the right supply and keep cables protected from damage.

Defect Means Isolate

Remove damaged electrical equipment from service and report it.

No DIY Repairs

Electrical repair belongs to an authorised competent person.

Dry Is Not the Only Test

Suitability also depends on voltage, environment, protection and equipment condition.

Lines Can Arc

Maintain the planned clearance; direct contact is not required for danger.

Contact? Stay Clear

Keep people away and follow the electrical emergency procedure.

Checkpoint rule

Do the check-up only after you can summarize each concept in one sentence and identify one dangerous pitfall from memory.

Knowledge Check (after reading)

Short check-up to confirm understanding of this module.

Check-up Questions

1-2 question checkpoint

Next step personalized recommendations

What is Pass Harbor?

Completely free exam prep for 247 UK exams.

  • Practice questions
  • Flashcards
  • Study guides
  • Mock exams
  • No registration
  • No paywall
  • Start instantly
No more expensive exam prep. Quality study tools should be accessible to everyone.